VTC 7240

Intel® Core™ i7-5650U 无风扇车载计算机
  • 主要特点
  • Intel® Core™ 双核i7-5650U处理器
  • 支持3个 SIM 卡 + 双 WWAN 模块
  • Dual accessible & hot swappable SATA 3.0 SSD/HDD (RAID 0/1)
  • 内建u-blox NEO-M8N 模块, 可选航位推算功能
  • 可选 CAN/OBDII 模块 (CAN Bus 2.0B 或 OBDII SAE J1939)
  • 通过WWAN 模块连接的RTC/SMS 网络唤醒功能
  • 通过WWAN 模块连接的语音通讯功能
  • 通过MIL-STD-810G认证
  • 4 x mini-PCIe槽的弹性扩展功能
加入查询
产品型录(PDF)
CPU Intel® Core™ processor dual core i7-5650U, 3.1GHz
内存 2 channel 204-pin DDR3L SO-DMIM socket support 1333/1666MHz up to 16GB, default Industrial grade 2GB
存储 2 x 2.5" SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0,1 supported (optional lockable storage available) 1 x CFast (externally accessible)
扩展 1 x Full size mini-PCIe socket (USB 2.0) 1 x Full size mini-PCIe socket (USB 2.0 + PCIe) 1 x Full size mini-PCIe socket (USB 2.0 + PCIe) 1 x Half size mini-PCIe socket (USB 2.0 + PCIe)
功能 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning Built-in G-sensor
I/O 前面板接口 4 x LED for power, storage, WWAN, WLAN 2 x 2.5" SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0,1 supported (optional lockable storage available) 1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port 2 x Externally accessible SIM card socket (selectable) 1 x Phone jack 3.5mm for 1 x Mic-In 1 x Phone jack 3.5mm for 1 x Line-out 1 x Externally accessible CFast card socket with cover 1 x Event button (trigger type) 1 x Reset button 3 x Antenna hole for WWAN/WLAN/BT
I/O 后面板接口 1 x 9 ~ 36VDC input with ignition and 35W typical power consumption 1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port 2 x RJ45 10/100/1000 Fast Ethernet with LED 1 x Phone jack 3.5mm for 1 x Mic-in 1 x Phone jack 3.5mm for 1 x Line-out with 1.5W output each 1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz 1 x DP port. Resolution up to 2560 x 1600 @60Hz 2 x DB-9 RS-232 1 x DB-9 RS-232/422/485 (RI/12V selectable) 1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B mini-PCIe card), 2 x MCU-DI and 2 x MCU-DO 1 x 16-pin terminal block
- 1 x CAN Bus 2.0B (on board)
- 1 x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
- 8 x Programmable GPIO
(Digital Input)
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3 ~ 12VDC
(Digital Output)
Digital output (sink type): 5VDC TTL (default), max current: 20mA
Digital output (source type): 3 ~ 24VDC, max current: 150mA
1 x 12VDC output (2A), SM Bus 4 x antenna hole for WWAN/WLAN/BT/GPS 1 x Fuse (15A)
电源管理 Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Status of ignition and low voltage can be detected by software Support S3/S4 suspend mode
操作系统 Windows 8, WES8 Window 7, WES7 Linux kernel 3.X
体积 260mm (W) x 206mm (D) x 79.5mm (H) (10.24" x 8.11" x 3.13") Weight: 2.5kg
环境 Operating temperatures:
-30°C to 55°C (w/ industrial SSD) with air flow
-20°C to 45°C (w/ commercial HDD) with air flow
Storage temperatures: -35°C to 85°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): 1.5g@5 ~ 500 Hz (in operation, HDD), 2g@5 ~ 500 Hz (in operation, SSD) Vibration (SSD/HDD):
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
Shock (SSD/HDD):
Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
通过认证 CE approval FCC Class A E13 Mark
加入查询
Take a minute and tell us what you think!